I kinda missed that detail the last 10 times This was helpful 0. After the modem has fully reinitialized connect the Westell to the NIC and then power up the computer. Router’s PPPoE client used. You might want to revise the “Important Additional Information” section: Step 4 The port settings and protocols for many popular applications are already preconfigured.

Uploader: Nedal
Date Added: 18 December 2008
File Size: 18.81 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 58223
Price: Free* [*Free Regsitration Required]

Replacing Bellsouth Modem – Forums – CNET

Click on the Status tab from the menu then mocem on the Connect button to connect to the Internet. If you want a wireless network buy an access point as shown here.

You must connect the Westell directly to ewstell computer’s NIC to make the necessary changes before you connect the other router. Can’t thank you enough. Remember, do not plug anything into the USB port! Under the Statistics menu and click on Logs in the sub-menu. See Section 2 below for more details. Thank you to the author any the many, many others on the Internet who take the time to write solutions like this. To rate this item, click on a rating below.

These procedures are based on the 1. Select the correct computer and click Done Step 6 The NAT screen will show a confirmation listing the service you selected. The Westell does not require any drivers or software to connect through Ethernet. They have remote diagnostics.


Install the wireless network adapter s per the manufactures’ instructions. Most folks recommend that you enable TurboTCP if the moedm is available on your specific router.

Replacing Bellsouth Modem

The features an improved chipset featuring DMH Dynamic Multi-Hybrid technology to provide better performance on marginal lines, however the look and interface are exactly the same. Please reference this FAQ.

A new pop-up will appear called Host Device. This post has been flagged and will be reviewed by our staff. I am convinced that there is some simple setting somewhere that will allow everything to work once I tweak it. The router provides On the positive side, the bold shape and muted colors do qualify it as a post-modern piece of art that can be used as a coffee table conversation starter. Yes, you could have just added the IDENT port to your DCC service, but it is sometimes nice to be able to disable one without having to disable the other, you know?

Since it is an internal modem it tends to cause occasional problems with IRQ conflicts, especially if you have a Sound Blaster audio card. Westell Bridged Ethernet Configuration Step 1 Make sure the power is completely removed from the Westell and the computer. If you need to access the screen press the reset button while powered on. Sorry, there was a problem flagging this post. Assigned router to DHCP and it actually received a Bellsouth router Westsll to Manual Mode – Requires you to manually initiate your DSL connection much like a dial up modem configuration.


Yes Business HD only Verdict: Just remember what ports you specify, you’ll need to know them later.

Bellsouth DSL wireless help with Westell … – Apple Community

Update Software from Server – Modem will automatically check the Ewstell Support Site for the latest update, download it, and start the update procedure. CNET’s Forum on networking and wireless is the best source for finding help, troubleshooting, and getting buying advice from a community of experts.

If you do not have the latest firmware please click here. Router’s PPPoE client used.